584,863 active members*
4,854 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc drill mate option parameters
Results 1 to 14 of 14

Hybrid View

  1. #1
    Join Date
    Sep 2019
    Posts
    14

    Fanuc drill mate option parameters

    I have a 1991 Fanuc drill mate model c with o-m controller. It recently had its memory scrambled. I had a 417, 427, and 437 digital servo parameter alarms. I was able to get a copy of the control parameters but Fanuc said I needed to call the tool builder for the option parameters. I called methods and they told me they did not build this machine and they don't know who did. The only suggest they could offer me was find someone who has the same machine and see if they would email you a copy of there option parameters. If anyone has one of these machines could you please contact me. Thanks everyone for all the great information supplied in this forum! It has helped out more times than I can count!

  2. #2
    Join Date
    Dec 2009
    Posts
    947

    Re: Fanuc drill mate option parameters

    do you have a photo of the serial number of the machine and also the serial number above the motherboard?
    do you any paper ,aka "data sheet"?

  3. #3
    Join Date
    Sep 2019
    Posts
    14

    Re: Fanuc drill mate option parameters

    Picture of the plate

  4. #4
    Join Date
    Dec 2009
    Posts
    947

    Re: Fanuc drill mate option parameters

    Quote Originally Posted by Bethk View Post
    Picture of the plate
    can you have a more good quality photo?
    or can you write down the :Serial number with P922.......

  5. #5
    Join Date
    Sep 2019
    Posts
    14

    Re: Fanuc drill mate option parameters

    The first plate says
    Type A04B 0073 A001
    The serial number is P922CA096

    I also have another plate on the other cabinet door that says
    Type A04B-0073-B201
    Serial no. 1084371

    I think one is for the machine and one is for the control?? Not sure tho?

  6. #6
    Join Date
    Sep 2019
    Posts
    14

    Re: Fanuc drill mate option parameters

    Picture of motherbboard
    Attached Thumbnails Attached Thumbnails 1620758859636634512585378037364.jpg  

  7. #7
    Join Date
    Apr 2006
    Posts
    111

    Re: Fanuc drill mate option parameters

    Your master pcb is not for Fanuc 0-mate. it is rebuilded. my machine master ocb is in picture
    Attachment 463486.

  8. #8
    Join Date
    Sep 2019
    Posts
    14

    Re: Fanuc drill mate option parameters

    Wow now I'm really not sure what to do????

  9. #9
    Join Date
    Apr 2006
    Posts
    111

    Re: Fanuc drill mate option parameters

    Quote Originally Posted by Bethk View Post
    Wow now I'm really not sure what to do????
    This is what I think. Original your machine use master pcb same as my machine. But your machine is rebuild with other master pcb so you should find rebuilder


    Sent from my iPhone using Tapatalk

  10. #10
    Join Date
    Dec 2009
    Posts
    947

    Re: Fanuc drill mate option parameters

    Quote Originally Posted by Bethk View Post
    Picture of motherbboard
    this will be very complicated for you
    this mother board is from a double spindle lathe
    A20B-2000-0180 PCB - MASTER B FS-0TTC 32 BIT

    you will have hard times to put it back as the most important is the diagnose parameters that can be rebuild from ladder sequence but you need a good guy

  11. #11
    Join Date
    Sep 2019
    Posts
    14

    Re: Fanuc drill mate option parameters

    I bought the machine used and it came with the manuals but no data sheets.

  12. #12
    Join Date
    Nov 2007
    Posts
    351

    Re: Fanuc drill mate option parameters

    1991 What model of a machine is this ?--------------2 Axis lathe or Mill ?------------What control a OM or OT ?
    Does the machine power up to IPL screen ?-----------Does it have any functions at all ?---------Pictures of the control powered on ?----------------------If a OT or OM you only need 900 to 923 as these are options for the machine and changes the control alot if not correct

Similar Threads

  1. Replies: 1
    Last Post: 01-12-2016, 07:06 PM
  2. help with Fanuc tape drill mate
    By landslide1 in forum Fanuc
    Replies: 3
    Last Post: 11-10-2012, 01:46 AM
  3. Fanuc OM option parameters
    By allmetalcnc in forum Fanuc
    Replies: 4
    Last Post: 06-19-2008, 02:31 PM
  4. anyone have a Fanuc drill mate or robo drill?
    By goodplastics in forum G-Code Programing
    Replies: 1
    Last Post: 07-22-2007, 04:36 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •