584,866 active members*
5,076 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Apr 2007
    Posts
    32

    SV-503/40 alarm 410 z-axis

    The machine is a SV-503/40 with fanuc 18i-m model a

    The alarm 410 for z-axis will randomly pop up when I unlock the door or m30 is commanded in a program and the z-axis brake is engaged.

    I increased parameter 1829 value a few hundred after observing what the value at DGN was hitting and that seemed to help a lot.

    fanuc troubleshooting manual says to check DGN G126 bits 0-7 for '1' when axis is clamped and i get only zeros


    can I just increase the parameter 1829 value until this problem goes away without any undesirable side effects? are there any common issues i can check or should i just follow the trouble shooting flowchart?

  2. #2
    Join Date
    Mar 2008
    Posts
    31

    Re: SV-503/40 alarm 410 z-axis

    probably the brake or timing belt issue.

Similar Threads

  1. 410 Alarm X axis ecess error
    By scuba in forum Fanuc
    Replies: 16
    Last Post: 02-19-2024, 07:39 PM
  2. Replies: 12
    Last Post: 01-12-2023, 10:58 AM
  3. Replies: 6
    Last Post: 01-14-2011, 05:16 AM
  4. Alarm 410 V axis Excess Error, FIX?
    By D_Flannery in forum Fanuc
    Replies: 1
    Last Post: 01-14-2011, 05:13 AM
  5. Fanuc 18I Z axis servo Alarm 410
    By Ninus in forum Fanuc
    Replies: 3
    Last Post: 09-22-2006, 05:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •