well after all of my pinout testing and documentation I found that it is documented perfectly in a file called mill55.awl. For any future lurkers:
Code:
// X3:1 E 0.0 Servo Ready X ( pys.Achse 0 )// X3:2 DIR X
// X3:3 DIR X/
// X3:4 CK X
// X3:5 CK X/
// X3:6 E 0.2 Servo Ready Z ( pys.Achse 1 )
// X3:7 DIR Z
// X3:8 DIR Z/
// X3:9 CK Z
// X3:10 CK Z/
// X3:11 E 0.1 Servo Ready Y ( pys.Achse 2 )
// X3:12 DIR Y
// X3:13 DIR Y/
// X3:14 CK Y
// X3:15 CK Y/
// X3:16 A 3.0 = M 17.0 // FREIGABE ACHSEN A
so the 2nd number tells you the pin number on the axis controller. Matches my guesses.
The following should be the pinouts for the vfd
Code:
// X3:1 Drehfeldfrequenz// X3:2 GND
// X3:3 // SOLLWERT 0-10V
// X3:4 // RICHTUNG
// X3:5
// X3:6 +24V
// X3:7 E 0.3 = M 15.7 // SERVO READY HA ( pys.Achse 3 )
// X3:8
// X3:9
// X3:10
// X3:11 A 0.3 = M 17.1 // REGLERFREIGABE HAUPTANTRIEB
// X3:12 A 11.5
// X3:13 A 11.6
// X3:14
// X3:15 GND