Hi
I need help to connect a Hypertherm THC sensor to my old Burny 3/5 control any one know where the connection are on the Burny 3/5 control or a diagram.
Is anyone here a burny/hypertherm expert? The machine is a SAF Oxytome 5PBD type 066B4105H with HL875A control Amplifier unit type 6218C46G03. it did have a Nertajet HP120 but was removed.
thanks for any advice
Results 1 to 1 of 1
-
05-18-2021, 08:28 PM #1
- Join Date
- May 2021
- Posts
- 2
Adding Hypertherm THC Sensor to a Burny 3/5 control SAF Oxytome 5PBD
Reply With QuoteSimilar Threads
-
Adding Hypertherm THC Sensor to a Burny 3 control
By MgW1 in forum CNC Plasma / Oxy Fuel Cutting MachinesReplies: 0Last Post: 05-12-2021, 04:32 PM -
Hypertherm Sensor PHC Torch Height Control
By Pure-Powder in forum Waterjet General TopicsReplies: 47Last Post: 08-29-2019, 04:46 PM -
Hypertherm Sensor Torch Height Control
By francis_liang in forum Hypertherm PlasmaReplies: 4Last Post: 08-21-2017, 12:26 PM -
burny 2.5rs and hypertherm max 100
By 2tpmafia in forum Waterjet General TopicsReplies: 3Last Post: 06-03-2011, 12:40 PM -
adding thc to burny control
By steve_p in forum Waterjet General TopicsReplies: 52Last Post: 10-03-2010, 04:13 PM
Tags for this Thread
Posting Permissions
