[maxlopez]

good evening, I saved the files of the osp5000 lathe on the floppy disk via the floppy disk reader fdd412a, now I have to bring the files to the computer, does anyone know the way to connect the fdd412a to the computer? or do you need another floppy disk drive? thanks in advance to those who answer me

[maxlopez]

can anyone give me an answer? thanks

[Iron-Man]

Hello maxlopez

These links may help:

https://webstore.kryoflux.com/catalo...products_id=30

https://kryoflux.com/?page=kf_features



Hope this helps,

Iron-Man

[mactec54]

can anyone give me an answer? thanks

Have you seen this https://torlus.com/floppy/forum/view...&t=3780#p21991

[maxlopez]

thanks for the suggestions, already known these posts. now i bought a FRP BOARD FDC BOARD II E4809-436-034-D 1911-1703,
in 25 days I receive it, I try with this if I can connect a 3.5 floppy, but I have the M2 -II card it seems not to be compatible with the FRD, to be compatible the card had to be MIIB, someone can confirm me how much I have written ?

[kurmay]

maybe it will help

https://synthroom.com/fairlight-cmi/...-disk-imaging/

[LUCIFERNIETZSCH]

thanks for the suggestions, already known these posts. now i bought a FRP BOARD FDC BOARD II E4809-436-034-D 1911-1703,
in 25 days I receive it, I try with this if I can connect a 3.5 floppy, but I have the M2 -II card it seems not to be compatible with the FRD, to be compatible the card had to be MIIB, someone can confirm me how much I have written ?

tried to PM you your inbox is full