545,526 active members*
1,926 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > MadCAM > Weird Toolpath
Results 1 to 3 of 3
  1. #1

    Join Date
    May 2021
    Posts
    1

    Weird Toolpath

    Hello! I want to cut a Profile of a Double-Bass-Bow. The head is scanned with an 3D Scanner and I constructed a Stick for it. Now I marked the edge wich lies on the Table. If I use the command "Profiling", it does this: MADCAMBUG.jpg (60.4 KB).
    How can I fix the toolpath?

  2. #2
    Registered
    Join Date
    Oct 2013
    Posts
    16

    Re: Weird Toolpath

    To me it looks like your profile curve may not be a closed curve...

  3. #3
    Member
    Join Date
    Aug 2005
    Posts
    184

    Re: Weird Toolpath

    From my experience using Rhino, when generating curves (depending on how you do it), there can be remnants of scanned points or lines left that occupy the same drawing space as the spline you've just created. Or if you've generated several line segments, but haven't joined them before post processing. When assigning tool paths, the software may pick up those remnants/disconnected line segments instead of the spline. The result is retracts where there should have been continuous cutting. Try selecting/deleting portions of the spline as a means of preserving just the spline and then assigning the tool path. Also, you'll want to join all additional geometry that wants to be part of a single toollpath.

    Hope this helps.

Similar Threads

  1. Replies: 0
    Last Post: 03-09-2021, 10:50 PM
  2. Weird rotary movement with fusion wrapped toolpath
    By ubergeekseven in forum Avid CNC
    Replies: 4
    Last Post: 09-24-2019, 04:12 PM
  3. Replies: 4
    Last Post: 10-20-2016, 11:45 AM
  4. Weird problem with abbreviated toolpath
    By wpflum in forum Machines running Mach Software
    Replies: 0
    Last Post: 03-15-2010, 01:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •