[Rekd]

Where does your favorite/bookmark/link for CNCzone point to?

[ynneb]

Cut to the chase "Get new posts" as home page.

[Rekd]

Originally posted by ynneb
Cut to the chase "Get new posts" as home page.

No, I use = about:blank

'Rekd

[cncadmin]

Guys really miss out by not check out the main page.

[ynneb]

Guys really miss out by not check out the main page.

No No that comes after all the new posts are read.

[kong]

I always goto the home portal, but I gotta admit, I often click "get new posts" before the page has loaded fully....sorry!:devious:

[balsaman]

Mee too.

EEric

Darn ee keey is busteed.

[turmite]

I use the home portal and part of the time take the time to read there. I saw a post on the home page the other day that Paul had made and have never been able to find it since. If I had taken the time to read it closely I might actually be able to remember where it was located. I try to go to the advertisers links ever so often also. I don't know if they can see the hits that come form this site or not but I could when I did advertising.

Mike

ps and no there is no great sucking sound from the south either!

[cncadmin]

The advertisers get a report of how many adviews and clicks they get. So yes they do see if people are going to their sites. The post your looking for is still their, all the posts on the main page can be viewed in the forums, either in the cnczone news section or product announcement section.

[marvinstov]

Home Page for me.

Leon

[systemfoxtrott]

Usually it is the last interesting subject I see that I mark in my favorits.Now its "Frustrated beyond limits" by widgetmaster because I know a few that may be able to give an ounce of help.Sometimes its a question that has come up on Daves site I get the answer here and pass it on or vise versa.I think I have about 30 deleats a week from my favorites on here.Your right it may be best to go to the main page but I like to work on 1 thing at a time till I get it licked then move on.

[ViperTX]

"new posts for me"..

[tobyaxis]

The welcome page then to new posts, then subscribed posts. :cheers:

[Mcgyver]

imo there are tooooo many forums to browse, so I pretty much cruise to the new post header.

[pipertom]

I go to the DIY-CNC Router Table Machines.
I am currently building my own and need all the help I can get!

Cheers
PiperTom

[swarfmacdaddy]

Photo gallery first, then new post. First thing after work. Like clockwork.

[ajl6549]

Home page, new posts, daily posts and then... :cheers:

[sunny_daise]

Mostly I start from the forum list, to choose some posts that I'm interested or what I can do for the others; and then the new posts, Home Portal, etc..

[sunny_daise]

The first I start in cnczone is the forum poll which attracted my attention deeply. I like this place, not only can collect some opinions about the cnc machine and the others, but also provide some fun for this forum. Then I visit my personal main page and made some settings, finally I went to the main page, that's all.