584,808 active members*
5,295 visitors online*
Register for free
Login
IndustryArena Forum > CAD Software > Logic Trace CNC/DXF > flying owl graphic for the vinyl cutter
Results 1 to 1 of 1
  1. #1
    Join Date
    Oct 2007
    Posts
    1010

    flying owl graphic for the vinyl cutter

    printed this image full sized and trace it out to create a *.dxf file for the vinyl
    cutter to cut out, then mount this vinyl cut out on a white substrate

    https://youtu.be/Qywnsyv0Tug
    Attached Thumbnails Attached Thumbnails net2.jpg   net3.jpg  

Similar Threads

  1. small graphic printed, digitized and cut from vinyl
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 02-27-2020, 09:19 PM
  2. digitizing a snow plow picture and cutting as a vinyl graphic
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 01-31-2020, 01:33 AM
  3. tracing a graphic and cutting it out of vinyl
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 11-01-2019, 04:45 PM
  4. tracing a graphic design for a vinyl cut
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 07-01-2019, 08:40 PM
  5. Digitize a paper diagram to create a vinyl graphic display
    By woodman08 in forum Logic Trace CNC/DXF
    Replies: 0
    Last Post: 05-11-2019, 06:39 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •