Hi all,

I have a 1996 Femco Durga 25E that I recently bought. Everything on it seems pretty good with low hours. After getting power to it, I fired it up and tried to jog it around. It jogs just fine in all directions for the first 11 seconds immediately after pressing the machine ready button, and then it just stops. There is no relay clicks from the control cabinet that I can hear, no alarms, no error lights on any of the boards, and none of the relays change state. The only way to get it to move again is shutting it down completely at the back of the machine. If I only turn the control power off, I get a AL-24 alarm on the spindle amplifier module.

Any help would be appreciated! I'm really looking forward to having 3 times as many tools as my old Haas HL-2!

Thanks,
James