Would anyone happen to have a post processor for my 4-axis CNC Machine or know of one that may work for it? I use Fusion 360.
The make of the machine is Blue Elephant and the model name is ELECNC-3012-4.
Any assistance will be appreciated.
Would anyone happen to have a post processor for my 4-axis CNC Machine or know of one that may work for it? I use Fusion 360.
The make of the machine is Blue Elephant and the model name is ELECNC-3012-4.
Any assistance will be appreciated.
The controller is RichAuto. Would anyone happen to know a RichAuto post for 4th axis milling?
Which board is it?
I've just read through the manual for the B11 board and it doesn't support a 4th axis rotary.
It is a 4 axis but..... It only supports the 4th as a slave to the Y on a router.
You need to have a read of your boards manual to see if it wsupports it first.
It states that it reads standard G code so I assume a Mach post should work.
Boards looked at:
B18: Supports a rotary C.
B11: Nope. XYZ+ slave Y only.
Dear Blue Elephant Customer,
Have a nice day! This is BLUE ELEPHANT CNC MACHINERY CO., LTD.
In order for our after-sales engineers to know about your machine configuration as soon as possible to solve your machine problems, please help to provide your machine pictures, S/N number, or the sale name who contact you. After you provide the above information, our professional after-sales team will contact you immediately.
Please give us your contact information such as whatsapp or email adress. Welcome to email us [email protected], or chat with us by whatsapp / wechat +86 150 6402 6772 etc.
Any reply will be highly appreciated.
Sincerely,
BLUE ELEPHANT
E-mail: [email protected] Web: www.elephant-cnc.com
--------------Jinan Blue Elephant CNC Machinery Co., Ltd-------------