Goo in program does not execute rapids . all moves act like Go1
Any ideas.
thanks
Goo in program does not execute rapids . all moves act like Go1
Any ideas.
thanks
I do have one, not exactly the best solution but if G00 are treated as G01 then replace G00 with G01 and give them rapid Federates? like I said, not the best solution but it could get you out of a pinch until someone with more experience takes a look at what may be wrong.
Thanks for the response and the correct solution which I have been using and it works fine for linear blocks in go1. I realize now, I didn't include the following info in my first message and for
that I am sorry. The rapids don't function in the cycle programs such as g92 or g74 and the like which makes the return of the tool slower than it should be.
Thanks much for your time
'