543,969 active members*
2,183 visitors online*
Register for free
Login
IndustryArena Forum > Laser Engraving and Cutting Machines > General Laser Engraving / Cutting Machine Discussion > Help, I am looking for a fiber laser engraver with X-Y table and cutting ability
Results 1 to 2 of 2
  1. #1
    Registered
    Join Date
    Jun 2007
    Posts
    1

    Question Help, I am looking for a fiber laser engraver with X-Y table and cutting ability

    Hello Folks,

    I already own a 50w chinese CO2 laser machine, but it cannot cut metal. Right now I am looking into buying a fiber laser engraver, partly because this is what I think I can afford, partly because I think (maybe wrongly) that I could use it for cutting maximum 1mm thick stainless (even if fairly slowly and in case there is one with enough power). I saw that these machines can be purchased with an x-y table, which would be great for getting straight cuts . . . in case instead of using the galvo mirrors, just having the beam vertical and move the table underneath instead (use it in x-y cutting mode). Now this is what I know almost nothing about. The machines I see on the net equipped with an x-y table, can they be used as lasercutters, or is the x-y table only ment for holding several parts and engrave them in the same fashion? I hope you know what I mean. How much power is needed to cut 1mm thick stainless? Any advice, also on brands, types, what should I look at etc. would be highly appreciated.

  2. #2
    Member
    Join Date
    Jun 2021
    Posts
    2

    Re: Help, I am looking for a fiber laser engraver with X-Y table and cutting ability

    Hi dear,This is Flora from Gweike Laser(https://www.gweikecnc.com/)so if you dont mind,may i know your email and whatspp to send you some videos to check it firstly?
    Flora
    flora@wklaser.com
    0086 13275359772

Similar Threads

  1. gweike fiber laser welding and fiber laser cutting machine
    By laserliu in forum General Fiber Laser Cutting
    Replies: 4
    Last Post: 06-28-2019, 02:59 AM
  2. Fiber Laser Engraver of China Perfect Laser?
    By Alicelee in forum General Laser Engraving / Cutting Machine Discussion
    Replies: 2
    Last Post: 01-20-2019, 01:37 PM
  3. Fiber Laser Engraver, Fiber Marking Machine
    By automationtechinc in forum Automation Technology Products
    Replies: 0
    Last Post: 07-18-2018, 10:39 PM
  4. Fiber cutting ability from 300w to 1500w
    By Gweikelasers in forum General MetalWork Discussion
    Replies: 5
    Last Post: 04-09-2017, 07:10 AM
  5. Cutting ability for different matieral of different fiber power source
    By Gweikelasers in forum General MetalWork Discussion
    Replies: 0
    Last Post: 03-29-2017, 03:09 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •