hi there, i just bought a machine, all this out of frustration on not getting items delivered dure to export problems and Brexit
yes i am based in frnace but to add i am not french, so not easy popping in somewhere
i bought a machine from east europe and all seemd ok, a long time ago i built boats and we just got some company to cut woood for us,
then i started doing interiors of vans here in France and selling them, we then progressed (so we thought ) to buying ready kits from suppliers and then welcome came Brexit and Covid, this threw us under the bus and here i am buying a machine , then struggling and refusing to ask for help for now two and half weeks still , or should i give up and sell it... grrr
so surprised to read that Cut2d is not as popular as my machine seller made it out to be or perhaps he misunderstood me as to what i wanted,
so back to my issues, either cut2d pro or my machine running the RichAuto system composition
i started downloading a vw logo to cut and on 6 mm board no probems, then i thought i would try 20mm board and what a mess, it keeps cutting onto the project, so downloaded another file and it does the same, on top of it the new one cuts outside of circle out and then it becomes a mess,
i tried redoing the Nodes, but i must be to stupid to work out why its not allowing me to cut thicker boards... i feel so lost and most proberly wrong timiming to ask for help as it feels liek the brains exploded with some many variations and settings,
but i will not give up, yet
main issue i have is trying to change the starting point of my logo as not to cut outer circle first, but also how to set the height of the bit as to not cut through the logo when going throught to next pocket, hope i make sense... sorry for a ***** post... i have tried to edit out the drama