543,656 active members*
2,137 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1

    Okuma servo motor

    Our Okuma LR10-M had a bl-ms125e-60t driven tooling motor that just recently had a magnet come off and wrecked the insides of motor, So do any okuma experts on this forum know if it possible to replace original motor with bl-ms125e-60tna or bl-ms125e-30t motors, The cost of replacement from okuma is more than machine is worth.

    Thanks

  2. #2

    Re: Okuma servo motor

    Quote Originally Posted by geoffeyles View Post
    Our Okuma LR10-M had a bl-ms125e-60t driven tooling motor that just recently had a magnet come off and wrecked the insides of motor, So do any okuma experts on this forum know if it possible to replace original motor with bl-ms125e-60tna or bl-ms125e-30t motors, The cost of replacement from okuma is more than machine is worth.

    Thanks
    Better change all motors, drivers and CNC with a brand new CNC kit.
    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html

  3. #3

    Re: Okuma servo motor

    Thanks very very helpfull

  4. #4
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23708

    Re: Okuma servo motor

    What is the price of the motor?
    Might be worth at least a try, they can't be that far apart.
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  5. #5

    Re: Okuma servo motor

    They want approx £15,000 for motor , The lathe only cost us about £12,000 4 years ago

  6. #6
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23708

    Re: Okuma servo motor

    What is the source of these motors you quote, ??

    "replace original motor with bl-ms125e-60tna or bl-ms125e-30t motors"
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  7. #7

    Re: Okuma servo motor

    Motors are on ebay

  8. #8
    Community Moderator Al_The_Man's Avatar
    Join Date
    Dec 2003
    Posts
    23708

    Re: Okuma servo motor

    You could check with the seller and confirm they have the same motor connector configuration
    CNC, Mechatronics Integration and Custom Machine Design

    “Logic will get you from A to B. Imagination will take you everywhere.”
    Albert E.

  9. #9

    Re: Okuma servo motor

    I have thanks, Already purchased the 60tna motor

  10. #10
    Community Moderator Jim Dawson's Avatar
    Join Date
    Dec 2013
    Posts
    4876

    Re: Okuma servo motor

    Quote Originally Posted by geoffeyles View Post
    They want approx £15,000 for motor , The lathe only cost us about £12,000 4 years ago
    That seems way over priced. I just looked at one on eBay for about USD$1300. https://www.ebay.com/itm/Okuma-BL-MS...-/303113991458

    Just yesterday I ordered a complete new 7.5kW servo motor, drive, and all cables, to replace my lathe spindle motor, for about USD$3300. Automation Direct.
    Jim Dawson
    Sandy, Oregon, USA

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •