Re: Looking at a Haas DM-1 VMC and need some input
Originally Posted by
kentdesautel13
I am currently running a Haas Super Mini Mill with 15HP , 10,000 RPM
I'm looking to add a second machine, and was considering a Super Mini Mill 2, ( Larger capacity tool holder, and also little larger X,Y,Z travel ) but I have some limitations on ceiling height, so some modifications to the ceiling would need to be done.
So I happen to run across a DM-1 ( Haas Drill and Milling machine )
It will give me more tool capacity, larger X,Y,Z travel, plus faster rapids, and it will not require any modifications to my ceiling.
All of my work is Aluminum, and mainly the machine will be doing milling, verses drilling.... but there will be some drilling and tapping.
Any feedback on the downsides of looking at a DM-1 as an alternative to a mini mill?
Thanks for your feedback...
Kent
How about Micro Center
Table
Table Size 650×300MM
T slot (width*number*distance) 14×3×100MM
Max.load 200KG
Travel
X/Y/Z travel 500/300/400MM
Spindle nose to table 120-520MM
Spindle center to column 340MM
Spindle
Spindle taper and diameter BT40/120MM
Spindle speed 10000RPM
Spindle motor power 3.7/5.5KW
Feed
Rapid feed X/Y:20M/MIN Z:12M/MIN
cutting speed 1-8000MM/MIN
X/Y/Z motor power and torque X/Y: 1.5KW/5NM Z: 1.8 KW/7NM
Armless Tool changer(Option)
No. of tools 12
Max.tool length 280MM
max. diameter 80MM/125MM(next release)
Max. tool weight 8KG
Pocket positioning time 0.8 SEC.
Arm Tool changer(not available)
No. of tools /
Max.tool length /
max. diameter /
Max. tool weight /
Tool changing time(Cam box) /
Accuracy
Positioning accuracy ±0.01/300
Repeatability accuracy ±0.005
General
Coolant tank capacity 130L
Coolant flow rate 40L/min
Air pressure 0.6Mpa
Airflow rate 130L/min
Power requirement 12KW
Dimension 1660×2000×1800MM
Weight 1800KG
It is about 30,000
http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html