585,761 active members*
4,013 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Puma 2600Y II Fanuc 0i-TF Pulse handle

Thread: Puma 2600Y II Fanuc 0i-TF Pulse handle

Results 1 to 3 of 3
  1. 06-09-2021, 02:12 PM #1
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222

    Puma 2600Y II Fanuc 0i-TF Pulse handle

    Hi,


    Pulse wheel works ok to - direction, but when rotating to + direction movement is not smooth, machine stops suddenly and then starts to move again.
    Position is ok but movement is not smooth.
    There is 4 wire's coming back to pulse wheel, they seem to be ok when shaking.
    Wire's are marked A,B,0V, +V
    What could be reason....new pulse wheel or some card problem ?


    Thanks,

    GB
    Reply With Quote Reply With Quote
  2. 06-10-2021, 04:07 AM #2
    dhardt
    dhardt is offline Member
    Join Date
    Feb 2013
    Posts
    788

    Re: Puma 2600Y II Fanuc 0i-TF Pulse handle

    Confirm pinout and voltages though the MPG by using the appropriate drawing for B31 or B32 setup

    If further assistance is needed, call my cell 973-803-9479
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479
    Reply With Quote Reply With Quote
  3. 06-11-2021, 11:24 AM #3
    Green Button
    Green Button is offline Registered
    Join Date
    Sep 2006
    Posts
    222

    Re: Puma 2600Y II Fanuc 0i-TF Pulse handle

    MPG was faulty, new one was not expensive and machine rocks again.

    Thanks for help,

    GB
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Doosan 2600Y II
    By Green Button in forum Daewoo/Doosan
    Replies: 1
    Last Post: 12-09-2019, 06:33 PM
  2. MPG Handle problem - Fanuc Series Oi-MB
    By PlasmaManZA in forum Fanuc
    Replies: 2
    Last Post: 04-30-2018, 08:09 PM
  3. Combined straight handle and t-handle tap wrench!
    By northernmach in forum News Announcements
    Replies: 0
    Last Post: 08-20-2016, 02:32 AM
  4. Puma 2600y g17 milling
    By yellerrado in forum Daewoo/Doosan
    Replies: 2
    Last Post: 01-28-2013, 06:27 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules