585,754 active members*
4,168 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Chinese Machines > Just built new router and having motor and or controller issues

Thread: Just built new router and having motor and or controller issues

Results 1 to 4 of 4

Threaded View

  1. 06-10-2021, 04:58 PM #1
    MilanSipek
    MilanSipek is offline
    Join Date
    Jun 2021
    Posts
    1

    Just built new router and having motor and or controller issues

    I bought a workerbee CNC machine from Yuyong Industries. The build went well and I can jog the machine around the table using mach3. But there is a knocking sound coming from the motors which is also audible during travel. And if I load and start a gcode (the roadrunner) the gantries shake and and the motor noises become quite violent. I think the problem might be with the controller (NVUM V2 4axis) or the power source… I did notice that the little green light on the power supply was dimming slightly in sync with the knocking noise from the stepper motors. I’ve gone through the same tutorial 10 times over now and I’ve got it all hooked up right… I’m lost
    Attached Thumbnails Attached Thumbnails 3F94513E-04AA-444D-8D97-61422BA8054E.jpg  
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Home built machine, hypertherm, mach3, G540 cut quality issues...
    By jayrod7387 in forum CNC Plasma / Oxy Fuel Cutting Machines
    Replies: 14
    Last Post: 04-15-2018, 01:52 PM
  2. Issues with home-built machine
    By Jeliassen in forum DIY CNC Router Table Machines
    Replies: 4
    Last Post: 02-05-2016, 10:19 PM
  3. Alignment issues with Home built cnc router
    By dglasco in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 06-20-2013, 08:18 PM
  4. CNC Router Help please. Motor Controller???
    By Pete75 in forum Australia, New Zealand Club House
    Replies: 5
    Last Post: 07-20-2011, 12:58 AM
  5. I need links on how to assembly a servo motor controller for my cnc 3 axis router
    By rodjava in forum DIY CNC Router Table Machines
    Replies: 2
    Last Post: 02-22-2008, 06:02 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules