[Mohytron]

Good afternoon, friends. I have a problem with the machine Robofil 240CC .
The machine costantly in short circuit without any connection of part or table.
When I activate the Electrical touch with type of touch 1, the machine writes that it is short circuit. Eclectrical touch with type of touch 0,2,3 - ther is no short circuit and i can do measuring. When i start machining or program it is constantly on short circuit. Does anyone have any ideas in which place to look for the cause of the problem, which chain to check? Thank you in advance! Michael

[kip0569]

Good afternoon, friends. I have a problem with the machine Robofil 240CC .
The machine costantly in short circuit without any connection of part or table.
When I activate the Electrical touch with type of touch 1, the machine writes that it is short circuit. Eclectrical touch with type of touch 0,2,3 - ther is no short circuit and i can do measuring. When i start machining or program it is constantly on short circuit. Does anyone have any ideas in which place to look for the cause of the problem, which chain to check? Thank you in advance! Michael

Michael,

You probably have resolved your problem by now. If you need any help let me know.

Dale

[atila82]

Hello fredns, I have same problem with robofil310 all time "tuch activation is on". can you help me?