585,917 active members*
3,579 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Looking for Mastercam Mill Turn Post Processors

Thread: Looking for Mastercam Mill Turn Post Processors

Results 1 to 2 of 2
  1. 05-13-2021, 02:00 PM #1
    Morh_378
    Morh_378 is offline
    Join Date
    May 2021
    Posts
    2

    Looking for Mastercam Mill Turn Post Processors

    Hello guys,

    I am looking for any Post processors for Mill Turn of Mastercam. Is there any charity person to share his post processor? I would be very grateful with him.

    Lot of thanks in advanced
    Reply With Quote Reply With Quote
  2. 06-30-2021, 10:36 PM #2
    cadcam
    cadcam is offline Community Moderator
    Join Date
    Apr 2003
    Posts
    3578

    Re: Looking for Mastercam Mill Turn Post Processors

    Quote Originally Posted by Morh_378 View Post
    Hello guys,

    I am looking for any Post processors for Mill Turn of Mastercam. Is there any charity person to share his post processor? I would be very grateful with him.

    Lot of thanks in advanced
    So you know if you are talking for the Mill Turn Product they are not your standard posts and Machine and control. they are a Single Machine environment. but both options are going to be locked to there software so you will not be able run. them

    Also other thoughts you did define a machine or what version.

    Any chance you just are looking so you play at test the MT inside of Mastercam?
    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
    Cadcam
    Software and hardware sales, contract Programming and Consultant , Cad-Cam Instructor .
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Free Webinar: From Good to GREAT – Mill-Turn Post-Processors
    By PeteRoy in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 1
    Last Post: 06-09-2020, 07:56 AM
  2. BobCAD post processors for Okuma Mill Turn
    By aldepoalo in forum Okuma
    Replies: 1
    Last Post: 06-07-2016, 06:32 PM
  3. BobCAD Post Processors for Hardinge Mill Turn
    By aldepoalo in forum Hardinge Lathes
    Replies: 0
    Last Post: 06-07-2016, 04:23 PM
  4. BobCAD Post Processors for Mori- Seiki Mill Turn machines
    By aldepoalo in forum Mori Seiki lathes
    Replies: 0
    Last Post: 06-07-2016, 04:16 PM
  5. BobCAD CAM Mill Turn Post Processors
    By aldepoalo in forum Daewoo/Doosan
    Replies: 0
    Last Post: 06-07-2016, 03:59 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules