Hey Guys;

I've replaced the linear bearing blocks on my machine which I thought were causing a creaking noise but of course using a stethoscope I now realize its the noise is from the bearings in the stepper gearboxes themselves. MultiCAM Canada has confirmed there are two bearing in each motor gearbox install. Maurice thinks they are common bearings likely 6202 but he's not sure of that number. Although that number corresponds well. I went ahead and ordered them from MultiCAM just in case but its been 3 weeks now and the last I heard from them was that they were still waiting to hear from their vendor before giving me a ship date. I'm already very likely overpaying for the parts which is OK if the service is there but ........

Does anyone know what these bearings are or can confirm Maurice's # or something I can cross reference as I'd like this fixed ASAP.

MC Canada describes them as; "bearing ball 15mm id35 OD snap ring"

Thanks
Mike