Could be a great deal for someone with a little time and space. This machine has worked great for years (since 1999). The motors all work and I can get it to move, but the controller needs to be updated. Others have successfully done this on the same model and now have a reliable, super sturdy machine. It is located in Costa Mesa, California and is still in good condition. Does not have a vacuum pump, but is piped for one.

Table is 50" x 100"
Spindle: 7.5 HP Colombo
No tool changer
Stepper motors
220v. 3 Phase

Asking $7500 My loss is your gain