The development team is pleased to announce version 1.9.2 of the RosettaCNC software downloadable from the download page:

https://rosettacnc.com/en/download-cnc.html

Changelog 1.9.2 vs 1.9.1

  • Added Custom Values management for custom firmware.
  • Added support of M109/M120 P100 Rr mode for multiple entry parameters dialog.
  • Added new Tilting-Head A/B Kinematics management (see Board Settings -> Axes).
  • Added Probe Analogic Input value visualization in Board Settings -> Digitalizer Panel.
  • Added new Program Settings -> Compiler -> Macro sheet to define user macros path.
  • Added new Top Toolbar Jog Mode button (see Program Settings -> Top Toolbar to set).
  • Added CNC Board Warnings managements:
    • Added new menu View -> Show Warnings.
    • Added new menu View -> Show Warnings History.
    • Enabled panel Warnings [ From Inputs ] in Program Settings -> Custom Alarms panel.
    • Enabled panel Warnings [ From Modbus ] in Program Settings -> Custom Alarms panel.

  • Improved DRO visualizations removing the Axes used as Gantry Slaves.
  • Improved analogic input values visualizations.
  • Improved CNC Board STOP -> RESUME management.
  • Improved DRO visualizations removing the Axes used as Gantry Slaves.
  • Improved GCode language and compiler:
    • Added support user macro path mode.
    • Added #5121: Locked axes mask.
    • Added #5139: Active user tool change procedure.
    • Added #5427: Tool type used for compensation.
    • Added new G10 L101 P
      V to set CNC internal parameters.
    • Added new M19: Spindle Orient (for supported firmware only).
    • Added new M34: Add axis to the interpolated group.
    • Added new M35: Remove axis from the interpolated group.
    • Added new M36: Unclamp axis (for supported firmware only).
    • Added new M37: Clamp axis (for supported firmware only).
    • Added new named parameter #.
    • Added new named parameter #.
    • Added new named parameter #.
    • Added new named parameter #.
    • Added new named parameter #.
    • Added new named parameter #.
    • Added new named parameter #
      .
    • Increased number of dynamic commands usable in a G-Code Program/Macro/MDI.
    • Changed named parameter # to #.
    • Changed named parameter # to #.
    • Changed named parameter # to #.
    • Changed named parameter # to #.
    • Changed named parameter # to #.
    • Improved G-Code compiling time when there are a lot of G38.x commands.
    • Fixed Block Delete management.
    • Fixed Macro encryption of large files.

  • Improved 3D view management:
    • Added Tilting-Head A/B management.
    • Added view of Axes Arrows (new menu View -> Show Axes Arrows).
    • Added view of Axis-driving vector when Rotary Guide for Axis [A|B|C] is shown.
    • Added Zoom with CTRL+Mouse Y (normal) SHIFT+Mouse Y (reduced) to simplify trackbar use.
    • Fixed Grid management with Tilting-Head Kinematics.
    • Fixed Transparency of the Virtual Machine Geometries Edges.
    • Fixed Transparency management when creating a new Virtual Machine.
    • Fixed Virtual Machine Transparency value recovery when control software starts.

  • Fixed Board Monitor -> Homing Correction Space visualization.
  • Fixed G-Code Line in Execution & Last Line Executed visualization.
  • Fixed Origin Mode to be always of type Custom with Rotary Axes for Table.
  • Fixed Board Settings -> Axes -> Extra -> Cornering Acceleration Override default to 100%.
  • Fixed Mouse issue when an M109/M120 dialog appears and the user is changing an OVR with the mouse.
  • Fixed Control Software issue when pressing Tools Library OK button with CNC in SIMULATOR state.
  • Fixed missing import of full data from settings.xml (CNC Board Settings) made with older versions.
  • Fixed CNC dynamic info management to RESUME a stopped program also after a PC shutdown.
  • Fixed visualization of Programmed Feed, Target Feed, Reference Feed in RUN/SIMULATOR state.
  • Fixed Program Settings -> Access Level panel to avoid duplicate passwords between access levels.
  • Fixed minor users reported issues.
  • Added new firmware for Board-A/B 1.54:
    • Aligned features with INTERFACE LEVEL 9.
    • Added new Modbus Interface.
    • Added new Tilting-Head A/B Kinematics.
    • Added new commands for Orient Spindle.
    • Added a new Jog Mode to move along the tool.
    • Added new Order Code to control motor STEP/DIR up to 2Mhz.
    • Added Homing Index management
    • Added some new parameters to control new features.
    • Disabled RETRACT management when a STOP occurs during a TOOL CHANGE.
    • Improved G-Code BPS rate.
    • Improved Interpolator Engine.
    • Improved JOG with digital inputs to be more responsive.
    • Changed Board-A/B OS to version 1.12.38.


A short video of new bevel-head support:
https://youtu.be/LH7sDliGtRY

https://youtu.be/UyubBwSsPWo