We have an Mori Seiki MV40 Milling center Fanuc 15MF, with a Fanuc AC Spindle Drive A06B-6059-H212. The S-code spindle speed commanded does not match the displayed spindle RPM on the drive. When a speed of S1000 is commanded, we see an RPM of approx 717, a difference of about 283. Spindle speed override set at 100%
How can we make the speed match the S-code?
Cheers,
Hanzz
Results 1 to 8 of 8
Threaded View
-
06-30-2021, 01:33 PM #1
- Join Date
- Jun 2021
- Posts
- 8
Mori seiki MV 40 Spindle Drive speed does not match S-code speed
Reply With QuoteSimilar Threads
-
mori seiki mv 35 spindle cant reach in commanded speed
By karthick in forum Mori Seiki MillsReplies: 0Last Post: 03-20-2021, 12:08 PM -
Milling spindle speed override on Mori Seiki mill-turn machine with Fanuc 31i A5
By MoriSeikiFanuc in forum FanucReplies: 1Last Post: 09-28-2019, 03:44 AM -
High Speed Spindle Error! on Mori Seiki SL-7 FANUC 6T
By EddieMach in forum FanucReplies: 0Last Post: 02-28-2019, 04:46 PM -
Fanuc AC Spindle Drive speed does not match S-code speed
By serickson in forum Spindles / VFDReplies: 2Last Post: 10-13-2014, 01:18 PM
Tags for this Thread
Posting Permissions
