[RINES]

OK, once again I am trying to diagnose svp boards. okuma cadet mate osp700 mill. the alarm is 2010-11 B SVP APA CHECK MAxis E93DE93E
I believe the error is from the z axis and tool changer. the mill has 2 svp boards. Does one board "communicate" with only the z and tool carousel? or do both boards have something to do with all 3 axis plus the carouel?

[Algirdas]

Check your entire tool change cycle. If there are no hits, if tool comes into the spindle nose centered.
It happens when machine is not leveled for a long time and level is lost. Sure, can be more reasons of tool change missalignment.

[RINES]

The machine seems to be level. As soon as the tool carousel starts to rotate, during a tool change, it throws up a svp alarm. 2010-11 Alarm B svp check MAaxis E453E452

[Algirdas]

are tools distributed equaly in the carousel?
Can you move the empty carousel outside the tool change cycle?

[RINES]

tools carousel is empty and like i said as soon as it begins to turn, the alarm pops up. Even in manual mode.