I'm trying to assist a friend who is running a ProStar PRS4 with a FlashCut controller running v7.0.6.26. It has a dual Y configuration with MP-3403 steppers. When jogging the Y axis, the Y steppers are moving at different rates, causing the gantry to bind. It is configured as shown in the manual. The Y motors are defined, and use sub axis 1 & 2. Any idea what could cause the different speeds?

Thanks much

Click image for larger version. 

Name:	Screenshot 2021-06-30 170934.jpg 
Views:	0 
Size:	19.6 KB 
ID:	466155