585,758 active members*
4,608 visitors online*
Register for free
Login
IndustryArena Forum > CNC Electronics > Leadshine > MX4660 shunt regulator option

Thread: MX4660 shunt regulator option

Results 1 to 3 of 3

Threaded View

  1. 07-01-2021, 04:11 PM #1
    TMToronto
    TMToronto is offline
    Join Date
    Jun 2021
    Posts
    105

    MX4660 shunt regulator option

    I have an email in to Leadshine, but have not heard back yet.
    For those of you who might be familiar with this driver and the use of shunt regulators, I was hoping to get feedback on whether the model I am considering is appropriate.
    The driver runs 4 NEMA 23 3.5V 4.2A steppers which are powered by a 48V 12.5A PSU.
    I have a quote for an Advanced Motion Controls SRST70, which I have seen recommended by Leadshine in one of their support documents, but it is much more expensive (at least from their distributor here in Canada). I also like the one I found as it allows a range of clamping voltages to be set.
    I appreciate any insights that can be offered.
    Tom
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Shunt Regulators
    By janz99 in forum Benchtop Machines
    Replies: 15
    Last Post: 07-02-2017, 02:21 PM
  2. mx4660 rps4810 shunt?
    By maxlulurose in forum Leadshine
    Replies: 17
    Last Post: 02-09-2017, 02:12 AM
  3. Do you have to shunt a timer?
    By Skiroy in forum CNC Machine Related Electronics
    Replies: 24
    Last Post: 09-02-2011, 03:50 AM
  4. Shunt circuit
    By fahque99 in forum CNC Machine Related Electronics
    Replies: 14
    Last Post: 08-05-2009, 05:54 AM
  5. R Shunt Burn
    By wanchai101 in forum Servo Motors / Drives
    Replies: 0
    Last Post: 03-26-2007, 04:20 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules