584,865 active members*
5,018 visitors online*
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Join Date
    Jul 2021
    Posts
    2

    Weihong NC300 controller

    Good day.

    Have a new milling machine with a "Weihong NK300CX" controller, dont have the password.
    Any suggestions?
    Also need to change the soft limits once have access.

    Regards

  2. #2

    Re: Weihong NC300 controller

    I have a Weihong NK 260

    Try combinations of the letters on that run in a diagonal. Ours is FRWY or something like that. Top left to bottom right.

  3. #3
    Join Date
    Jul 2021
    Posts
    2

    Re: Weihong NC300 controller

    Many thanks, will revert.

Similar Threads

  1. Technical support for WEIHONG CNC Controller, NCstudio,NK260
    By jason-weihong in forum Commercial CNC Wood Routers
    Replies: 6
    Last Post: 08-24-2022, 04:10 PM
  2. Weihong ncstudio CNC controller card Driver help!
    By xchiazyx in forum Commercial CNC Wood Routers
    Replies: 0
    Last Post: 10-04-2016, 02:41 PM
  3. Replies: 0
    Last Post: 11-24-2014, 01:24 AM
  4. Weihong NK105G@ DSP Controller
    By cnc170 in forum Australia, New Zealand Club House
    Replies: 0
    Last Post: 11-07-2014, 07:01 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •