[amirelremely]

I have a problem with my KIA VMC V60, all parameters have been cleared accidently, including (PMC parameters, Keep relays, CNC parameters, Ladder, Custom macros) after contacting with manufacturer technical support.
they sent me the following:
- CNC parameters
- PC Parameters including (Timers, Counter data, Spindle speed data, Manual feed data, ATC, .....)
- Pitch Error compensation
and told me that are all they have for this machine, and send me PLC file for another machine (*.MEM) which I couldn't deal with, I hope if this file contains the ladder, and other missed stuff, even if there's slight difference, cause I have in the machine manuals the ladder diagram that might allow me to compare and get my machine working again.
Please if you have any idea, help me!

[drdos]

Your ladder isn't lost. Once you loaded in the CNC parameters then your ladder will pop up again. Fanuc has several ladder types for that model of CNC and once you set the option bit for the correct PMC type that is in your machine then it will be able to be displayed.

[amirelremely]

[QUOTE=drdos;2460356]Your ladder isn't lost. Once you loaded in the CNC parameters then your ladder will pop up again. Fanuc has several ladder types for that model of CNC and once you set the option bit for the correct PMC type that is in your machine then it will be able to be

[amirelremely]

Your ladder isn't lost. Once you loaded in the CNC parameters then your ladder will pop up again. Fanuc has several ladder types for that model of CNC and once you set the option bit for the correct PMC type that is in your machine then it will be able to be displayed.

I already have uploaded the parameters but there's nothing in the ladder diagram.