584,874 active members*
5,120 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2021
    Posts
    1

    High speed spindle supplier

    I'm looking for a small, perhaps 800 watt, 24000 rpm 3-phase air cooled spindle with angular contact bearings and integral ER11 chuck. It will be used with small (1mm and smaller) cutters for milling aluminum so low spindle runout is critical.

    There are lots of vendors on eBay and Amazon with reasonable prices and various US based suppliers for much more money. Any Canadian sources? Does anyone have a recommendation of a brand / supplier with which they have had a good experience? Any that I should avoid?
    ______________________
    Urbach Roofing, Inc.

  2. #2
    Join Date
    Nov 2013
    Posts
    4282

    Re: High speed spindle supplier

    Hi,
    I've used a German made 750W air cooled spindle for six years, extremely happy, not cheap but absolutely best quality.

    https://www.mechatron-gmbh.de/en/

    Craig

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •