Good Day.
I bought A11 Plus controller and connected it, Now the motors are running the opposite direction. All axis. i was replacing the 0401 controller. Whats the solution.
Results 1 to 5 of 5
Threaded View
-
07-15-2021, 10:57 AM #1
- Join Date
- May 2021
- Posts
- 2
Stepper motors running opposite direction
Reply With QuoteSimilar Threads
-
Avid CNC Plug and Play NEMA 23 - Y axis motors running in opposite directions
By justicedavid65 in forum Mach 4Replies: 2Last Post: 01-08-2020, 08:33 PM -
Machine decided to home x in the opposite direction
By yugami in forum MilltronicsReplies: 3Last Post: 01-01-2019, 11:23 PM -
How to Wire Stepper Motors Facing Each Other For Same Direction Running...
By PatrickMM in forum Stepper Motors / DrivesReplies: 3Last Post: 06-06-2017, 02:02 PM -
CNC problem, X goes in the opposite direction
By tilen986 in forum Mach Software (ArtSoft software)Replies: 3Last Post: 12-15-2015, 05:30 PM -
Mach3 is moving in the opposite direction
By maly-miller in forum Mach MillReplies: 3Last Post: 03-04-2014, 03:00 PM
Tags for this Thread
Posting Permissions
