[Chris D]

How to Make Zero Clearance Insert Plates for your Table Saw

Zero Clearance inserts for your table saw improve safety and cut quality. Chris walks you through the process of how he makes them.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/


Cheers!
Chris DeHut

[Chris D]

Make this Turned Calculator project

Another great turning project from Dick Sing. This turned base really dresses up this calculator which in turn can dress up any desk. These make great gifts for everyone and you can really get creative with your designs!
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.com/woodworking-files


Cheers!
Chris DeHut

Note: I could not find the source for the calculator - if someone knows of a source, please post it in this thread. THANK YOU!

[Chris D]

How to make Carved Pulls for your Cabinets

For a REALLY custom look on your cabinets and furniture, try your hand at a carved handle or pull. The drawer/door handle (pull) is the one object everyone will touch and feel on your cabinets. If you want your cabinet to stand out, take a look at this video and watch as David Reilly walks you through the process of carving this leaf shaped pull.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page…
https://makingstuffwithchrisdehut.co...working-files?


Chris

[Chris D]

Using Dial Calipers in the Wood Shop

Fine joinery requires tight fits and accurate cutting and more often than not, you are working in tolerances of a few thousandths of an inch. Many woodworkers get by on feel and intuition etc. However, for the rest of us, we use tools that help us measure to these accuracies. The dial (or digital) caliper is one such tool that not only measures, but is also a GREAT layout tool.?

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/



Cheers!
Chris

[Chris D]

How to Turn with Skews Part 1 of 2

Turning with skews is a challenge for all woodturners, especially the beginners. If you want to master the skew, watch this video. Dick Sing explains the techniques of how and why for skews.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/?



Cheers!
Chris DeHut

[Chris D]

Make this Stool for Your Shop
Make this sturdy shop stool for your workshop. Features a comfortable solid wood seat that rotates, a foot rest that is at a comfortable height and a distinctive hand made look. Take a load off and spend more time COMFORTABLY in your shop.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/


Cheers!
Chris DeHut

[Chris D]

Serving Trays for a Fun Project
Learn how to make these attractive serving trays for your home. These are not only attractive, they are functional and show off a variety of your woodworking skills. Make some for yourself or better yet, make some as gifts to friends and family
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website.
This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files

Cheers!
Chris

[Chris D]

Is it worth it to upgrade CNC with Closed Loop Steppers?
After 6 months of use, was this update worth it? In Sept. 2022, I upgraded my CNC router with closed loop stepper motors and drives. This video answers the question "Was it worth it".


Cheers!
Chris DeHut

[Chris D]

Making a Molding Plane Part 1 of 2

Molding planes are fantastic tools that are deeply imbedded in the traditions of woodworking. Making custom planes is certainly a skill serious woodworkers should consider learning. David Reilly walks you through the entire process in this two part video.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!

Resurrected from the Woodworking At Home Magazine. Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files



Cheers!
Chris DeHut

[Chris D]

Making a Molding Plane Part 2 of 2

Part 2 of 2... Molding planes are fantastic tools that are deeply imbedded in the traditions of woodworking. Making custom planes is certainly a skill serious woodworkers should consider learning. David Reilly walks you through the entire process in this two part video.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website. This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files


Cheers!
Chris

[Chris D]

CNC Carving Overview and Workflow
In this video, Chris provides and overview of the CNC Carving process and explains the work flow. Topics briefly covered are: Using Fusion 360 to create the G-Code from STL file, Tooling selection, Work holding options, and review of the cutting process. This is a great watch if you are considering CNC carving.
Be sure to visit the companion website Making Stuff With Chris DeHut - Making With CNC and Raspberry PI, Woodworking Projects, Raspberry PI PICO, Making With CNC and Raspberry PI


Cheers!
Chris

[Chris D]

W085 Make this Podium Book Stand in Your Shop

This project started out as a request from a friend for a stand to display valuable books at the entrance to a home. Its design lends itself as a Lectern, Podium, Book Stand, and probably more. Even if you are not interested in making this, there are plenty of techniques that can be learned in this video. Take a break, and follow along as Chris walks you through the processes involved in this project.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.

Supporting documentation for this video can be found on the companion website.
This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files


Cheers!
Chris

[Chris D]

Let's take a look at Mortising machines

In this video on Mortising, the Drill Press and Hollow Chisel Mortising machines are explained and demonstrated. With so many options, there is no excuse to not work with these very strong joints.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/


Cheers!
Chris

[Chris D]

How to carve a Linen Fold

The linen fold form is one of the all time classics for carving. This design dates back generations, and can still be seen in finely crafted architectural elements and fine furniture. David Reilly demonstrates the process so that you can learn this highly coveted skill.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/



Cheers!
Chris

[Chris D]

Carving Accents on Turnings

Carving isn't restricted to just flat work! David Reilly shows you how to add details to your turnings with simple carved accents.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/?



Cheers!
Chris

[Chris D]

Carving a Vase

How to carve a vase that has been turned. David Reilly decorates this vase with carvings to give it that handcrafted, rustic look. Follow along and learn the techniques for carving round objects.

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/



Cheers!
Chris

[Chris D]

How to Make a Contemporary Mirror with Half Columns

Learn the technique of making half-round & veneered columns with this project. A contemporary mirror that can easily be resized and re proportioned to fit any wall space.
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/?


Cheers!
Chris

[Chris D]

Business Card Holder Project
Small projects can be a lot of fun. These little business card holders make for great gifts and they are easy to make.?
Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/?


Cheers!
Chris

[Chris D]

Paper Towel Dispenser
This useful kitchen project dresses up the countertop or tabletop while serving up paper towels in style. Simple and clean design in a contemporary styles that makes for a great gift!

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Please visit the companion website for more information about these videos…
https://makingstuffwithchrisdehut.com/


Cheers!
Chris

[Chris D]

How to carve a spoon by David Reilly
Handmade and carved wooden spoons come in a countless variety of shapes and sizes. In this video, David Reilly shows you how to make wooden spoons. From this video, you will learn the fundamentals so that you can jump into the world of spoon carving, it is a lot more fun than you think!

Please subscribe to the channel, without subscribers the channel cannot survive, IT IS FREE, thank you!
Resurrected from the Woodworking At Home Magazine.
Supporting documentation for this video can be found on the companion website.
This link will take you to that resource page… https://makingstuffwithchrisdehut.com/woodworking-files
https://youtu.be/Ev57kP4lOhY
???????
Cheers!
Chris DeHut