584,814 active members*
5,169 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1

    6040 CNC controller/spindle issue

    My grandfather purchased a 6040 CNC machine by chinazone. I cannot find any markings of who makes the controller, the CNC machine is Model: CNCST4060AB3. Now I am not sure if the 4060 is just backwards in the model number or what. But after setting it up we can get the x,y and z axis to move but the spindle will not spin up. He had one of my uncles try to look at it and fix it, and when I came back over with what I thought would get the spindle going their is now an error. It is flashing P.oFF and the TRIP light is flashing along with the HZ light is lit up. I have tried following others instructions but they seem to be older controllers and do not look the same. And when I go into the P (settings?) and the D(settings) they are much different. In example P0.00 is set at 0.75 and cannot be changed. Can anyone help?? Thank you in advance
    Attached Thumbnails Attached Thumbnails PXL_20210720_183858160.jpg  

  2. #2

    Re: 6040 CNC controller/spindle issue

    I have the same problem with the same machine. I've been searching the internet for days. Can anyone help?

Similar Threads

  1. Newbie to CNC issue with chinacnczone 6040 spindle
    By Iron_Geek_37 in forum Chinese Machines
    Replies: 2
    Last Post: 04-21-2020, 09:16 AM
  2. Newbie to CNC issue with chinacnczone 6040 spindle
    By Iron_Geek_37 in forum Spindles / VFD
    Replies: 0
    Last Post: 04-13-2020, 07:55 PM
  3. New 6040 CNC machine. Spindle controller settings.
    By RoddQLD in forum Australia, New Zealand Club House
    Replies: 3
    Last Post: 05-29-2018, 08:29 AM
  4. 6040 Spindle Issue with Mach3
    By snag96 in forum Chinese Machines
    Replies: 3
    Last Post: 01-30-2018, 11:50 PM
  5. CNC 6040 Setting or Other Issue - HELP!
    By DeeMaster in forum Mach Software (ArtSoft software)
    Replies: 2
    Last Post: 01-24-2016, 11:16 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •