584,862 active members*
5,886 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Chinese Machines > Piranha PJCM 2030-3 Communication Problems
Results 1 to 1 of 1
  1. #1
    Join Date
    Jul 2021
    Posts
    1

    Unhappy Piranha PJCM 2030-3 Communication Problems

    Hi All
    Recently our PC crashed which we use to work with our Piranha PJCM 2030-3. When we got a new Hard Drive and reinstalled the Controller software it would still not connect to the CNC. I suspect it has something to do with a Ethernet to 15 pin serial type cable that is between the PC and CNC. There are no techs i can find to help with this. Manetech don't seem to know.

    Is it protocol settings for the ethernet port? I've attached a few pics.
    Attached Thumbnails Attached Thumbnails 20210720_132110.jpg   20210720_154725.jpg  

  2. #2

    Re: Piranha PJCM 2030-3 Communication Problems

    Hello,

    we are having the exact same issue and I was wondering if you managed to get to the bottom of the issue? I have tried looking for drivers and software that could help with the serial over Lan connection but I can't seem to get this working.

    Kind Regards,
    David McDermott

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •