584,866 active members*
4,982 visitors online*
Register for free
Login
IndustryArena Forum > WoodWorking Machines > Commercial CNC Wood Routers > Chinese Machines > Piranha PJCM 2030-3 Communication Problems
Results 1 to 2 of 2

Threaded View

  1. #1
    Join Date
    Jul 2021
    Posts
    1

    Unhappy Piranha PJCM 2030-3 Communication Problems

    Hi All
    Recently our PC crashed which we use to work with our Piranha PJCM 2030-3. When we got a new Hard Drive and reinstalled the Controller software it would still not connect to the CNC. I suspect it has something to do with a Ethernet to 15 pin serial type cable that is between the PC and CNC. There are no techs i can find to help with this. Manetech don't seem to know.

    Is it protocol settings for the ethernet port? I've attached a few pics.
    Attached Thumbnails Attached Thumbnails 20210720_132110.jpg   20210720_154725.jpg  

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •