[Orodjar545]

Hey guys,

I literally don't know any more what to do or how to fix this, so I am begging you give me some advice on how to make it work, we urgently need the machine.

We bought an Eagle Yang 1000. Up till now everything was working fine, but now that we are trying to get the code and data from the PC to the machine, it just won't go through.

The machine was made in 2000, and this is a serious problem.

I can't set up a connection from my programe CIMCO - CNC Fanuc. I can output and recieve the data to my PC normally, but when I try the other way an error message immediately, the error code 071. So that means that the data is not received by the machine, and I cannot figure out why.

Is it a cable issue (the cable is RS 232) or a communication issue, and what can we urgently do so that this will work?

Please can you help me, it is so weird that the machine gets the code through to the computer, but it can't receive it the other way around.

As said, CIMCO and running on Win 10.

Thank you so much guys