585,685 active members*
4,596 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > PlanetCNC > M62 to assign output number 4 to fire the torch

Thread: M62 to assign output number 4 to fire the torch

Results 1 to 2 of 2
  1. 07-27-2021, 08:11 PM #1
    Carbinemarine
    Carbinemarine is offline Member
    Join Date
    Mar 2021
    Posts
    2

    M62 to assign output number 4 to fire the torch

    hi Newbie here. having completed my table i am now in the process of commissioning. as i am new to g and m code
    i am on a fairly steep learning curve. I am using a planetcnc USB MK3/4 With planetCNC TNG.I have wired the trigger switch for the plasma to output number 4 but i am having trouble getting my head around using m code to assign output number 4 to be trigged either in the program or in the Post processor (THC floating z axis) ie the code syntax and where to position it in the PP/ Program
    any help would be gratefully accepted. thanks
    Reply With Quote Reply With Quote
  2. 07-31-2021, 09:20 AM #2
    hoizlaender
    hoizlaender is offline Member
    Join Date
    Jan 2016
    Posts
    19

    Re: M62 to assign output number 4 to fire the torch

    Hello Newbie,

    did you ever type M62 P4 Q1 in the MDI?
    This switches output 4 to "on".

    M62 P4 Q0 to "off".
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules