Hello,
we have recently purchased a Koike Duct cutter with a Hypertherm D80 unit on it. Currently Running predator CNC editor for my DNC but can't get the computer to communicate with the unit. I have checked all my settings on the COM port and the controller and they are matching. I know it used to use a program called Link to communicate with a host computer, but I was wondering if there was a way to get to a ReadTape setting, we did this on our other plasma, to send the G-code to it. I am not sure what the hang up is or what the next step would be. Any help would be greatly appreciated. Thanks.
Results 1 to 2 of 2
-
07-29-2021, 03:18 PM #1
- Join Date
- Jul 2021
- Posts
- 2
Hypertherm D80 Cant connect to host computer
-
07-29-2021, 04:26 PM #2
Member
- Join Date
- Mar 2009
- Posts
- 1982
Re: Hypertherm D80 Cant connect to host computer
Looks like regular troubleshooting of serial communication. Is it RS232?
check once again. Check the cable. Perform test using two PC's.checked all my settings on the COM port and the controller and they are matching
Reply With QuoteSimilar Threads
-
Hypertherm D80 Cant connect to host computer
By Jesse_c20 in forum Hypertherm PlasmaReplies: 0Last Post: 07-29-2021, 02:56 PM -
rd 6445g refuse to connect to computer
By sigalgalkin in forum Laser Engraving / Cutting Machine General TopicsReplies: 1Last Post: 12-08-2019, 09:25 AM -
How to Connect FV-800 with Computer
By wajid in forum Uncategorised MetalWorking MachinesReplies: 0Last Post: 02-22-2016, 05:41 AM -
host comm. overflow and connect issues
By valuehorse in forum Multicam MachinesReplies: 0Last Post: 10-17-2012, 08:05 PM -
How to connect Hypertherm 85 to candcnc
By Liquidlogic in forum Hypertherm PlasmaReplies: 1Last Post: 03-15-2012, 04:03 AM
Tags for this Thread
Posting Permissions
