shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
Hello,
Here is a short video on how to do this.
ATB
Andre
thanks
i will mess with it some more
shizuoka an-s knee mill=kflop/kanalog running nema 34 dc brushed servos
cincinnati sabre 750=kflop/kanalog building now with ac brushless servos
You will need to do the maths. There are no g-code instructions for this.
Cheers
Roger
Hello Roger,
I'm sorry but I don't understand your reply.
All you need to do is draw the arc, you can do this by using the three point arc option and choosing the first end point, middle point and second end point.
ATb
andre
Hi Andre
Ah - you are using a CAD system? I understand.
I was talking about trying to use the G2/G3 instructions in the XZ or YZ planes, in Mach3.
Cheers
Roger