does anyone else have the 4-jaw chuck meant for the 10 x 18 lathe?? i just got mine today and was told it came with an adapter plate, but there isnt one in the box.. im a little upset that i was told it would be there. why would they say that it is meant for that lathe if it needs an adapter plate anyways???
Thanks;
Thread: Busy Bee 4-jaw
Results 1 to 4 of 4
-
08-21-2007, 03:05 AM #1
Registered
- Join Date
- Dec 2006
- Posts
- 45
Busy Bee 4-jaw
-
08-21-2007, 01:37 PM #2
Registered
- Join Date
- Jul 2007
- Posts
- 24
As far as I knnow there is a 4"' x 4 jaw and a 6". The 6" needs the adapter plate B2227LCA
http://busybeetools.ca/cgi-bin/pictu...TITEM=B2227LCA
Paul
-
08-21-2007, 04:58 PM #3
Registered
- Join Date
- Dec 2006
- Posts
- 45
i guess i should mention that it is the b2227LCHUCK that i have, it is a 5" and was supposed to be for that particulat lathe... i had seen some cheaper chucks around but i didnt want to have to mess with making an adaptor plate...
-
08-21-2007, 05:00 PM #4
Registered
- Join Date
- Dec 2006
- Posts
- 45
i just looked at the link you attached... looks like that is what i need... why would they say that this chuck is for that lathe if it still needs an adaptor plate to go with it???
Reply With QuoteSimilar Threads
-
Busy Bee 10x18 lathe
By Ace12GA in forum Mini LatheReplies: 24Last Post: 02-20-2020, 06:34 AM -
Busy Bee 10 x 18 B22227L
By quick toy in forum Mini LatheReplies: 33Last Post: 02-17-2020, 08:26 PM -
DCad post problem: Server busy?
By metalworkz in forum Dolphin CAD/CAMReplies: 19Last Post: 05-24-2008, 01:54 AM -
Canadian Source for MiniLathe other than Busy Bee
By yukonho in forum Mini LatheReplies: 16Last Post: 01-29-2005, 10:00 AM
Posting Permissions
