Hello,

Is there someone has a tutorial to do inlay with fusion 360 in detail... ?
What i want to do is basically what you can see on the youtube channel "Broinwood"
its cutting board with precise inlay.
i will need to use a 18 or 20 degre Vbit, 60 is too big and i dont have 45 degre.
or if no tutorial i need to know which passes i should use for each part, inlay and pocket. and some detail about setting for each passes.

I already know that the inlay have to be longer than the pocket.
Mostly i need to know how to tell fusion 360 to carve that angle nicely on both side.

thanks in advance!