I connected my vfd (220v,7A,1.5 kw) to spindle(220v,1.5 kw but on its nameplate it is 6A) using mactec14 parameters as below and it is working well but the speed is fixed at 7200 rpm(120Hz) on display,it is not possible to change speed manually on vfd. I connected R as live and T as neutral and pin 1 to U 2 to V and 3 to W. Please, I need your help ,this is my first post and thanks for a really helpful cnc forum, a friend directed me here and I was suprised it was good as he told me.

Huanyang Mactec54

PD000=0 for Parameter unlock ( 1 ) for Parameter Lock

PD001=0 (1 For Remote Control)

PD002=0 ( 1 For 0-10v Terminal Control or Remote Trim Pot Control )
( J1 Also Needs to be set for Terminal Control )

PD003=400

PD004=400

PD005=400

PD007=20

PD008=220

PD009=15

PD010=8

PD011=120 ( 100 Minimum Setting with Quality VFD, 120 is Safe)

PD13= 08 is for Factory reset, Only use this to set VFD to Factory Default Settings

PD014 Acceleration=12 ( Adjust to suit)

PD015 Deceleration=12 (Adjust to suit)

( PD15 is ignored IF PD26=1 Then the Spindle will Coast to a Stop)

PD141=220 ( Motor Rated Voltage )

PD142= 6A ( Motor Max Amps) Since 6A is on spindle nameplate

PD143=2 ( Motor Number of Poles)

PD144=3000 (Max Motor RPM) =3,000= (24,000)

PD70=0

PD72=400

PD73=120