[automationtechinc]

https://www.youtube.com/watch?v=9sHQS7cTckw

We tested this NEMA34 closed loop stepper motor system-hybrid servo kit 1128 oz-in ( KL-8080L&KL34-8N-1000L) for a customer with 60VDC power supply.

Product Link:
NEMA34 closed loop stepper motor system https://rb.gy/umnvr7
60VDC Power Supply https://rb.gy/78eq8z

NEMA 34 Hybrid Servo kit (closed-loop stepper system):

1pc Hybrid Servo Driver KL-8080L

1pc NEMA34 KL34-8N-1000L Hybrid Servo Motor with one Encoder 1000 line

1pc 3 meter cable or longer

A: KL-8080L 2-phase Hybrid Servo Driver:

KL-8080L is a low cost, high performance servo systems, for a variety of large-scale automation equipment and instruments, it is better for user to expect with low-cost, low vibration, low noise, high-precision, high-speed equipment, more suitable lower rigidity actuator load, such as a belt type than conventional servo.

Input 60-110VDC / 45-80VAC, No Tuning, Nulls loss of Synchronization
Output 6.0 A
High-performance, low price
Micro-step
Automatic idle-current reduction
Optical isolating signals I/O
Max response frequency up to 200Kpps
Low temperature rise, smooth motion
Online adaptive
B: NEMA34 Hybrid Servo Motor, KL34-8N-1000L, 1/2" Shaft

Rated Torque 1128 oz-in, 8 N-m, with Encoder 1000 line
Number of Phase: 2
Step Angle: 1.8°±5%
Motor Holding Torque: 8.0 N.m
Current: 6.0A
Phase Inductance(1KHz): 4.3 ±20%mH
Wiring:

A+ to BLU

A- to RED

B+ to GRE

B- to BLK

C: 3 or 5 meter Encoder cable

1000 pulses per revolution

Quadrature digital signals: 4000 steps per revolution

4000 / .05 pitch

80,000 counts per unit

[dazp1976]

A stepper.
Meh.