Build a UC400ETH motion controller for customer
Using 48VDC power supply for Stepper Drivers and 24VDC+5VDC for UC400ETH and C10.
https://www.youtube.com/watch?v=HoPkYdaGXW8
Product Link:
UC400ETH: https://rb.gy/evnmql
Power Supply: https://rb.gy/swffah
C10: https://rb.gy/qsqykk
KL-5056 Stepper Driver: https://rb.gy/y3cxdx
- Controls up to 6-axis simultaneously.
- Works with mach3, Mach4 or UCCNC software.
- Up to 400kHz step frequency operation.
- Ethernet connection to the control PC.
- Same pinout as a standard LPT port.
- Fast communication with data buffer for robust and stable operation.