[oz_eight6]

Long time lurker first time poster,

I am trying to export the Machine Parameters using TNC Server. cant find parameter file program number under which the machine parameters
are stored

I have had a Bridgeport VMC 1000 -22 (circa 1994)

My machine parameters are all present and the machine for the most part is running well, will post them up here once i can get them backed up

i have gotten as far as

Below is the instructions on how to do it but i cant seem to find the "program number"

Press "MOD" until "Code Number" is displayed
Enter "95148" in CODE NUMBER
Press "ENT" to Activate MP mode
Press "EXT" & the press "ENT" to prepare TNC for data output

Enter the program number under which the machine parameters
are stored

Press "ENT" to Start data transfer

When the data transfer is finished, the dialog EXTERNAL DATA OUTPUT
is cleared.
Pres "END" to exit MP mode

attached is an extract from the manual

[oz_eight6]

FIXED

hope this helps someone else with similar issues

Made one very small adjustment to the instructions and got it to work,


Press "MOD" until "Code Number" is displayed
Enter "95148" in CODE NUMBER
Press "ENT" to Activate MP mode
Press "EXT" & the press "ENT" to prepare TNC for data output
Press "NOENT" to create new file
Enter the program number under which the machine parameters
are stored
Press "ENT" to Start data transfer

When the data transfer is finished, the dialog EXTERNAL DATA OUTPUT
is cleared.
Pres "END" to exit MP mode