[rdc02271]

Hello,

I am looking for ( without sucess so far ) steel suppliers that sell plates/bars with these dimensions (minimum values)

Steel Type Thickness/Height (mm) Width(mm)(minimum)
1.7225 55 300
1.0038 (S235JR) 65 300
1.0503 (C45) 35 300

I am also looking for supplier of AW-6060
Thickness/Height (mm) Width(mm) (minimum)
AW-6060 60 300

Thank you for your help,
Jorge

[Jim Dawson]

None of those thicknesses are standard.

1.7225 is close to 14ga (1.897mm)
1.0038 is close to 18ga (1.214mm)
1.0503 is close to 18ga (1.214mm)

Just get them sheared to size

''I am also looking for supplier of AW-6060''

6060 aluminum should be available in common sizes. Where are you located?

[noweshop]

I think Calvind Dude may have what you need.

[rdc02271]

Hello,
I should had specified this before: I am based in Europe.
We are looking for thick AW-6060 plates : 40mm onwards.

Thank you.
Jorge

None of those thicknesses are standard.

1.7225 is close to 14ga (1.897mm)
1.0038 is close to 18ga (1.214mm)
1.0503 is close to 18ga (1.214mm)

Just get them sheared to size

''I am also looking for supplier of AW-6060''

6060 aluminum should be available in common sizes. Where are you located?

[alicesophia]

IF you are finding about better service in manufacturing options the OEM vs ODM is the better option to guide you step by step. This blog will help you to put your own setup in any kind of services in manufacturing.