584,812 active members*
5,416 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Daewoo/Doosan > Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle
Results 1 to 11 of 11
  1. #1
    Join Date
    Apr 2011
    Posts
    13

    Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Vertical 5025 machining center
    forgot I had to change spindle location for tool change after changing spindle bearings
    of course it faulted because keys not lined up
    I thought I did everything right to get out of it but still get alarm
    tool arm appears put back, all looks good but get alarm, x and y move but can't move z axis . Z can not be referenced
    Any help to clear the alarm would be appreciated.
    I did read a bulletin about it and it said change Keep Relay K12-B4 parameter 1 to 0 but mine is zero if I am looking in the correct spot.

    Thanks

  2. #2

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    can you post the ladder file?

  3. #3
    Join Date
    Apr 2011
    Posts
    13

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by drdos View Post
    can you post the ladder file?
    LOL I can try, its been 15 years since I got into ladder.
    Let me see If I can figure out how

  4. #4
    Join Date
    Apr 2011
    Posts
    13

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    I found the I/O softkey (I assume that is what you wanted) and was able to save to my PCMCIA card but no idea how to post it here or even read it on my PC since its .000 extension.

  5. #5
    Join Date
    Apr 2011
    Posts
    13

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by drdos View Post
    can you post the ladder file?
    I figures it out, thanks
    I had to change keep relay 64.4

  6. #6
    Join Date
    Sep 2007
    Posts
    66

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    hi,

    in maintenance mode you can move though the cycle step by step .




    M39 in the MDI

    Move handle to jog

    Go around back and index carousel until it stops moving

    Go back around front

    M19

    M41

    M40

    "copied text from internet" but i can take a photo from my manual

    then if all is well the machine makes 1 tool cycle



    greetings bertus

  7. #7
    Join Date
    Feb 2013
    Posts
    788

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by RaceFan View Post
    I figures it out, thanks
    I had to change keep relay 64.4
    Please note: on some machines this keep relay is K12.4, others it is K64.4
    This relay can only correct the issue if the CAHP.M (changer arm home position. monitor) is a 1 as well as THOMEI.M (tool home indicator. monitor) being a 1 if it is present.
    As these are LADDER issues....they are changeable at any time by alteration or upload of a ladder change. (these potential solutions are not "set in stone" and can be changed to something different)

    DO NOT RANDOMLY change Keep Relays without fully understanding what it will do, or you could cause permanent damage to your machine.
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  8. #8
    Join Date
    Feb 2013
    Posts
    788

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by bertus.nl View Post
    hi,

    in maintenance mode you can move though the cycle step by step .




    M39 in the MDI

    Move handle to jog

    Go around back and index carousel until it stops moving

    Go back around front

    M19

    M41

    M40

    "copied text from internet" but i can take a photo from my manual

    then if all is well the machine makes 1 tool cycle



    greetings bertus
    M250 would put it into MAINTENANCE MODE
    Doosan Service Technician
    [email protected] O:973-618-2461 M:973-803-9479

  9. #9
    Join Date
    Sep 2007
    Posts
    66

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    No

    M39 puts the toolchanger in maintenance mode if you have problems.

    with the buttons of the toolcarrosel you can run forward and back trough the cycle .

    the keeprelay is for telling the machine it is on the home position

    greetings bertus

  10. #10
    Join Date
    Apr 2011
    Posts
    13

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by bertus.nl View Post
    hi,

    in maintenance mode you can move though the cycle step by step .




    M39 in the MDI

    Move handle to jog

    Go around back and index carousel until it stops moving

    Go back around front

    M19

    M41

    M40

    "copied text from internet" but i can take a photo from my manual

    then if all is well the machine makes 1 tool cycle



    greetings bertus
    Ah ha, "until it stops moving" . I used the M39 several times in the past vut only to move the arm out of the way. And yes when I tried to resolve this issue, the carousel moved so I stopped and figured it was not working. I needed to rotate carousel a full rotation and then it would stop?

  11. #11
    Join Date
    Apr 2011
    Posts
    13

    Re: Fanuc 21i alarm 2103 must be command maintenance ATC 1 cycle

    Quote Originally Posted by dhardt View Post
    Please note: on some machines this keep relay is K12.4, others it is K64.4
    This relay can only correct the issue if the CAHP.M (changer arm home position. monitor) is a 1 as well as THOMEI.M (tool home indicator. monitor) being a 1 if it is present.
    As these are LADDER issues....they are changeable at any time by alteration or upload of a ladder change. (these potential solutions are not "set in stone" and can be changed to something different)

    DO NOT RANDOMLY change Keep Relays without fully understanding what it will do, or you could cause permanent damage to your machine.
    Yes I agree. I looked through the ladder and figured out which latch was needed to clear the fault. I have a little experience with ladders from my G&L repair days 30 years ago lol. It just took a bit to search and find because I don't know how Fanuc works.
    Changer arm was home but can I search for the CAHP.M ? Or better yet, how can I search for it?

Similar Threads

  1. Fanuc 21i ALARM 24 HELP !!!!
    By austenit in forum Fanuc
    Replies: 8
    Last Post: 11-28-2019, 12:46 AM
  2. Fanuc 21i-TB Alarm at M0 :confused:
    By MikeHTech in forum Fanuc
    Replies: 3
    Last Post: 04-14-2016, 02:16 PM
  3. Alarm 1034 on Fanuc 21i-TB
    By etol56 in forum Fanuc
    Replies: 4
    Last Post: 04-03-2014, 04:21 PM
  4. Fanuc 21i-t roughing cycle spring pass
    By e126569 in forum Fanuc
    Replies: 2
    Last Post: 05-01-2013, 09:02 AM
  5. G90 (Canned turning cycle) Fanuc 21i-TB ?
    By Jdavis733 in forum G-Code Programing
    Replies: 0
    Last Post: 01-24-2008, 03:18 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •