584,808 active members*
5,242 visitors online*
Register for free
Login
Results 1 to 8 of 8

Hybrid View

  1. #1

    Software problem

    I have a dynapath delta 50M control but when i turn on the following messages appear

    "Power fail: part program and setup information must be reload"

    And

    "Cycle power to continue. Watchdog timer si tripped"

  2. #2

    Re: Software problem

    Quote Originally Posted by Mikeordaz View Post
    I have a dynapath delta 50M control but when i turn on the following messages appear

    "Power fail: part program and setup information must be reload"

    And

    "Cycle power to continue. Watchdog timer si tripped"
    Looks like hardware problem caused this problem.
    http://cncmakers.com/cnc/controllers/CNC_Controller_System/CNC_Retrofit_Package.html

  3. #3
    Join Date
    Sep 2017
    Posts
    1

    Re: Software problem

    Quote Originally Posted by cncmakers001 View Post
    Looks like hardware problem caused this problem.
    What was the outcome. I got the same message after we replaced the battery. Very frustrating.

  4. #4
    Join Date
    Mar 2009
    Posts
    1982

    Re: Software problem

    Watchdog points to hardware problem. Software is generating the message, so software is correct. Check the power supply and if the CPU is seated in the socket well.

  5. #5
    Quote Originally Posted by Algirdas View Post
    Watchdog points to hardware problem. Software is generating the message, so software is correct. Check the power supply and if the CPU is seated in the socket well.
    what are the correct values in the power supply?

  6. #6
    Join Date
    Aug 2009
    Posts
    1566

    Re: Software problem

    Quote Originally Posted by Mikeordaz View Post
    I have a dynapath delta 50M control but when i turn on the following messages appear

    "Power fail: part program and setup information must be reload"

    And

    "Cycle power to continue. Watchdog timer si tripped"
    ...check the Battery voltage on the SRAM Card....should be above 3.1vdc. Replacement is easy with add-on battery pack because there 3 Pin plug for battery.

    ...to clear the Watchdog Timer you might need the CNC.EXE Floppy reloaded after Battery updating.

  7. #7
    Quote Originally Posted by machinehop5 View Post
    ...check the Battery voltage on the SRAM Card....should be above 3.1vdc. Replacement is easy with add-on battery pack because there 3 Pin plug for battery.

    ...to clear the Watchdog Timer you might need the CNC.EXE Floppy reloaded after Battery updating.
    Where can i get cnc.exe???

  8. #8
    Join Date
    Aug 2009
    Posts
    1566

    Re: Software problem

    ...Dynapath is still in business, but they will what to sell you a Floppy upgrade $300+CNC exe cost. Call or email them with your Serial Number of the CNC control you have.
    https://www.dynapath.com/services.php
    good luck..and lets us know how much the CNCEXE costs ya, IF you need it.
    DJ

Similar Threads

  1. software problem engraving problem please help
    By jassk in forum Laser Engraving / Cutting Machine General Topics
    Replies: 3
    Last Post: 10-19-2014, 09:31 AM
  2. Problem with Fastcam software
    By ambc75 in forum Uncategorised CAM Discussion
    Replies: 0
    Last Post: 11-04-2012, 12:29 PM
  3. machine problem or software problem?
    By bcnc in forum Syil Products
    Replies: 8
    Last Post: 10-26-2009, 03:51 PM
  4. HS1 software problem I think
    By The CNC Noob in forum Haas Mills
    Replies: 3
    Last Post: 08-18-2009, 08:34 PM
  5. Computer or software problem?
    By jguerrera in forum CamSoft Products
    Replies: 4
    Last Post: 11-10-2008, 04:05 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •