I have a dynapath delta 50M control but when i turn on the following messages appear
"Power fail: part program and setup information must be reload"
And
"Cycle power to continue. Watchdog timer si tripped"
I have a dynapath delta 50M control but when i turn on the following messages appear
"Power fail: part program and setup information must be reload"
And
"Cycle power to continue. Watchdog timer si tripped"
Watchdog points to hardware problem. Software is generating the message, so software is correct. Check the power supply and if the CPU is seated in the socket well.
...Dynapath is still in business, but they will what to sell you a Floppy upgrade $300+CNC exe cost. Call or email them with your Serial Number of the CNC control you have.
https://www.dynapath.com/services.php
good luck..and lets us know how much the CNCEXE costs ya, IF you need it.
DJ