[ablackwell]

Hi all,

Has anyone got a complete list of system variables, (VS), for the Okuma OSP300 control they can pass to me please.

I'm trying to control the tool measure in cycle for new tools via the "USE" toggle.

Cheers in advance

Alan

[kurmay]

Look at this list

https://www.hartwiginc.com/learning-...-okuma-lathes/

[deadlykitten]

hy if you look for VS+ :
... a-z, then check attached list of system variables
... 0-9, then you will need to dig the msb files, or look through the manuals; those are not system variable, but kind of a mix type, between common/array and local; however, they allow acces to data for measuring cycles and probes, allowing one, for example, to custom build a gauging cycle

for more details, please be specific / kindly