I am looking for a Haas Super Mini Mill 2
I could be talked into a regular super mini mill, but my preference is a Mini Mill 2
Needs at least 10k RPM
2009 or later if possible.
Thank You..
Kent
Nisswa MN
I am looking for a Haas Super Mini Mill 2
I could be talked into a regular super mini mill, but my preference is a Mini Mill 2
Needs at least 10k RPM
2009 or later if possible.
Thank You..
Kent
Nisswa MN
Here is one on eBay https://www.ebay.com/itm/11490813438...AAAOSwoyZg~0Hr
Jim Dawson
Sandy, Oregon, USA